• Dual dual-core Intel® Xeon® processors in an air-cooled format
• Architecture supports 4-way symmetric multiprocessing (SMP)
• I/O interfaces include quad Gigabit Ethernet, RS-232 serial I/O, high-speed serial ATA-150 (SATA), USB 2.0, and SVGA
• Three PCI Express® x8 links with bandwidths of up to 2 GB/s
• 667-MHz front side bus
• Dual DDR2-400 ECC memory interfaces that can access up to 4 GB of memory

• State-of-the-art performance levels for compute-intensive applications
• Brings server-level performance to a single VME slot
• 4-way SMP configuration eases porting from existing configurations
• Abundant I/O interfaces with easy connectivity
• PMC-X/XMC expansion site for added versatility
• Bridges the gap from legacy to industry-standard I/O
• Air-cooled

Dual-Core Intel® Xeon® Processors
Two Dual-Core Intel® Xeon® processors ULV at 1.66 GHz

Intel® E7520 Memory Controller Hub
PCI Express (PCIe): Three x8 links
Dual-channel memory interface: 2 GB or 4 GB DDR2-400
Processor system bus interface: 667 MHz

Intel® 6300ESB I/O Controller Hub
16550-compatible UARTs
Two USB 2.0 ports
IDE port with 2-GB flash drive

Firmware Hub: BIOS™ storage (write-protected)

Gigabit Ethernet
Two Intel® 82571EB dual-port Gigabit Ethernet MAC/PHY chips
Two link ports available at front panel (dual RJ-45 connector)
Two link ports available at the P2 backplane

Serial RS-232 I/O
Two asynchronous serial RS-232 port interfaces at P2 backplane

USB 2.0
Single USB 2.0 Type A connector at front panel
Two USB interfaces at P2 backplane
USB uFDM flash device socket

SATA
eSATA connector at front panel
Second SATA port at P2 backplane

GPIO
8 GPIO pins available on the J2 backplane (5V tolerant)

SVGA Graphics (Air-Cooled Version)
ATI RAGE Mobility M graphics with 4-MB on-chip SDRAM
Resolutions up to 1280 x 1024
HD-15 VGA connector at front panel

PMC-X/XMC Site
IEEE 1386/1386.1 PCI mezzanine card
VITA 39 PMC with PCI-X running at up to 66 MHz
VITA 42.3 XMC switched mezzanine card with PCI Express
User I/O pins routed to J2 per VITA 35

Backplane Interface
System controller or peripheral card operation through the backplane bridge
VME64 Tundra® Tsi148™ PCI-to-VME bridge

Dimensions
Form factor: 6U VME per VITA 41
Height: 9.2 in (233 mm)
Depth: 6.3 in (160 mm)

Weight: 1.2 lb (0.544 kg) air-cooled

Power Requirements
5V, 3.3V: Required from backplane
±12V: As required by PMC module

Power Consumption*
Dual processor, dual memory configuration
   5V: 34W
   3.3V: 42W
   Total: 76W
Single processor, dual memory configuration
   5V: 17W
   3.3V: 42W
   Total: 59W
* Power consumption values are estimates of worst-case conditions.

Environmental Specifications
Temperature
   Operating: -25°C to +55°C, air-cooled
   Storage: -40°C to +85°C
Humidity (air cooled): 5-95% at 40°C (non-condensing) )
Shock: 50 z-axis; 80g x/y axis; 11 ms half-sine
Vibration: 0.04g, 22/Hz at 20-20,000 Hz, 1 hr/axis, air-cooled
Airflow: 270 LFM minimum, air-cooled
Altitude
   Operating: 0-30,000 ft, Level 1 air-cooled
   Storage: 0-50,000 ft, air-cooled

Standards Compliance*
Safety: Designed to meet standard UL1950/60950
Emissions: Designed to meet FCC Part15, Sub-Part A
*VX6-200R SBC is designed to be certified within a system environment.