Specifications
Processor
SL9380 low-voltage dual-core Penryn CPU: 1.8 GHz
Front side bus: 800 MHz
Memory Controller
Whitmore Lake chipset 3100
(memory controller and I/O controller)
DDR2 interface: 400 MHz
Front side bus: 800 MHz
Single/dual x4 PCIe link to Bridge FPGA
x4 PCIe link to a dual Ethernet controller
Dual SATA interfaces
Memory
NAND flash disk USB 2.0 interface: 4 GB
DDR2 x72 bits wide (ECC protected): 2 GB, 800 MHz
Fabric Options
Dual 4x or single 8x PCIe
4x serial RapidIO at 10 Gbps
Bridge FPGA
Xilinx® Virtex™-5 LX50T
Flash for Bridge IP bitstream storage and loading: 128 Mb
x4 SERDES to AMC Ports 4-7: 3.125 GHz
Optional support for AMC Ports 8-11
Backplane connectivity
4x serial RapidIO: 2.5/3.125 Gbps
With available PCIe-to-sRIO bridging IP
4x PCIe: 2.5 Gbps
Optional support for dual x4 or single x8 (factory population option)
4x 10 Gigabit Ethernet: 2.5 Gbps
PCIe-to-10 Gigabit Ethernet bridging IP required
IPMI Controller
Renesas® HD64-F2166 micro-controller
FRU 4-KB serial EPROM
Two NE1618DS temperature sensors for a total of 4 sensing locations
Including internal temperatures of 3100 and Penryn ICs
IPMB-L 2-wire interface to carrier
Voltage monitoring
Front-Panel I/O
RJ45 10/100/1000Base-T Ethernet
USB 2.0 port
Dual serial ports (accessing 3100 and IPMC)
Mechanical
Full-height
Width: 73.81 mm
Depth: 180.6 mm
Height: 28.96 mm
Mid-height
Width: 73.81 mm
Depth: 180.6 mm
Height: 18.96 mm
Supports AMC B+ bays
Test and Development
XDP Intel emulator connector
14-pin JTAG/programming header for IPMI controller
Full JTAG chain from AMC connector
Power Consumption
+12V payload power: 60W max; 45W typ
+3.3V management power: 0.250W max; 0.100W typ
Software Support
Linux® and Windows® support