Specifications
Processor
Freescale MPC8548 PowerQUICC III signal processor running at up to 1.3 GHz
High-speed interfaces
1x or 4x serial RapidIO connections
Data rate
1x connections 4, 8, and 10 Gbps max after 8/10 encoding
4x connections 10 Gbps max after 8/10 encoding
Memory
Flash: 128 MB
DDR2: 512 MB
IPMI
Lower ejector handle switch
Hardware address
IPMI
Lower ejector handle switch
Hardware address
AMC connector
1000BASE-X fiber SerDes interface over copper link Ethernet (Port 0)
1x/4x serial RapidIO (Ports 4-7)
IPMB-A and IPMB-B links
Front panel
LEDs per AMC.0
Out of service: Red
User LED2: Green
User LED3: Yellow
Hot Swap: Blue
Gigabit Ethernet: Reset button
RJ45 Gigabit Ethernet
USB 2.0 compliant (does not support 480 Mb speed)
Serial port interface to MPC8548E and IPMI controller
Test and development
16-pin JTAG/emulator connector
14-pin JTAG/programming header for IPMI controller
ICT test points
Software support
Linux variant (2.6 kernel, 32- and 36-bit mode)
Mechanical
Full-height
Width: 73.81 mm
Depth: 180.6 mm
Height: 28.96 mm
Mid-height
Width: 73.81 mm
Depth: 180.6 mm
Height: 18.96 mm
Supports AMC B+ bays
Specification compliance
AMC.0 Rev 1.0 compliant
Hot-swap support
Environmental
Temperature
Operating: 0°C to 55°C
Storage: -40°C to +70°C
Operating humidity: 5-90% non-condensing
Vibration: 0.003g2/Hz, 20-2000 Hz, 1 hr/axis
Shock: x/y axes: 32g; z axis: 20g; 11 ms, half-sine
Air flow: Chassis dependent - consult factory
Power consumption
12V (payload) 20W ttyp, 25W max
3.3V (management) 0.25W typ, 0.5W max