|
 1.866.627.6951
 1.800.872.0040
(Support)
 Email
|
|
Ensemble 2000 Series
MFib-201 Fiber/Copper I/O AMC Module
The Ensemble™ 2000 Series MFib-201 Fiber/Copper I/O AMC Module supports serial data-plane communications and a Gigabit Ethernet control-plane connection through the front panel for multi-shelf and multi-chassis system configurations. Using a variety of serial protocols or Ethernet connections, it also allows external data devices to stream data in for processing.
The MFib-201 is a mid-height (optionally full-height), single-width AMC, designed to function with either an ATCA carrier card, such as the Ensemble BCC-201 Quad AMC Carrier Blade, or within a MicroTCA chassis.
Features
- Supports one 8x, two 4x, four 1x, or any combination of 4x or 1x serial fabric ports
- Quad small-form-factor pluggable (QSFP) transceivers
- Supported protocols: serial ATA, Fibre Channel, Gigabit Ethernet, IEEE 1394b, InfiniBand®, PCI-X, serial RapidIO®, SAS, and XAUI
- Supports Gigabit Ethernet connection, converting from 1000BX on AMC connector to 1000Base-T on front panel
- Onboard Module Management Controller (MMC)
Benefits
- Flexible serial communications and dta streaming
- Robust module for standards-based, scalable ATCA® and MicroTCA® platforms
- Protocol-agnostic I/O via eight 3.125 Gb/s front-panel optical or copper links
- One copper Gigabit Ethernet connection on the front panel
Specifications
Mechanical
Mid-height or full-height, single-width AMC
Supports AMC B+ bays Electrical
Input voltage (Vdc ± 5%): 12V and 3.3V Power Consumption
Payload at 12V
5W typical
6W maximum
Management at 3.3V
0.25W typical
0.5W maximum Environmental
Temperature
Operating: 0°C to 40°C inlet air
Storage: -40°C to +85°C
Altitude
Operating: 0-10,000 ft
Storage: 0-30,000 ft
Humidity
Operating: 10-90% non-condensing
Air flow: Chassis-dependent; consult factory.
|
|
|