• Xilinx Virtex FX Series with dual integrated 405 Power Architecture™ cores for optional use with 60 or 100 thousand logic blocks (device-dependent)
• FPGA supported by 64-bit bank of DDR2-400 SDRAM for high-speed data memory accesses and additional bank of NOR flash memory for self-boot and persistent memory store
• 4 PCI Express® lanes with 8 Gbps of full-duplex data bandwidth
• Standard daughtercard with support for two Gigabit Ethernet connections and one RS-232 serial connection
• Up to 28 single-ended GPIO connections and 7 LVDS connections via customized daughtercard and interconnection module
• Ultra-compact, rugged PowerBlock 50 chassis

• Real-time signal processing and I/O engine
• Ultra-compact, rugged form factor with innovative conduction-cooled design for harsh environments
• Features Xilinx® Virtex™-4 FX Series FPGA
• Gigabit Ethernet and RS-232 connections for external front-panel I/O
• High-bandwidth PCI Express® interface to system backplane for inter-processor communication
• Customizable I/O capability

Mechanical
Size with daughtercard
   100 mm x 103 mm x 15 mm (3.9 in x 4.1 in x 0.59 in)
Weight
   Main card: 83 g (2.93 oz)
   Fully integrated module: 300 g (10.6 oz)

Processing Engine
FPGA
Xilinx Virtex-4 FX60 or FX100 device
   FX60: 60k logic block, 128 DSP slices, 4.2 Mb RAM
   FX100: 100k logic block, 160 DSP slices, 6.8 Mb RAM

External Memory
SDRAM DDR2-400 64-bit SDRAM
   FX60: 256 MB
   FX100: 512 MB
NOR flash
   FX60: 32 MB
   FX100: 64 MB

Backplane Interconnect
Switch fabric
   4-lane PCI Express serial interconnect
   8 Gbps, full-duplex
System management
   I2C-based system management bus (SMBus)

Integrated I/O
Ethernet I/O
   Two Gigabit Ethernet ports on standard I/O daughtercard
Serial I/O
   RS-232 on standard I/O daughtercard
General-purpose I/O (for use with custom I/O daughtercard)
   28x single-ended, LVTTL GPIO pins
   7x LVDS (or 14x single-ended) GPIO pins

Software
Development tools
   Network-based FPGA flash upload capability

Operating System Support
Linux via proxy control from the root complex card

Custom Engineering
I/O daughtercard design kit and custom services available on request.

Environmental*
Temperature
   Operating: 0°C to 55°C per VITA-47 CC1
   Storage: -40°C to +85°C per VITA-47 CC1
Humidity: 15-90% RH, non-condensing
*The environmental parameters listed are for the system as currently qualified using the supported components as specified in the engineering development kit (EDK). Qualification in your application is dependent upon the heat exchange unit chosen, as well as the cooling fluid used. For further details, consult factory.

Electrical
Input voltage
   12V DC: 2.5A (maximum)
   3.3V DC: 1.5A (maximum)
Power consumption
   Absolute maximum: 35W (application-dependent)
   Typical: 13-18W (application-dependent)