• Intel EP80579 SoC device with IA-32 core based on Pentium® M running at up to 1.20 GHz
• Processor core with 32-bit bank of DDR2-800 SDRAM
• Bank of SPI flash memory for self-boot, additional 2-GB bank of NAND flash memory for persistent memory store, and Linux® root file system
• 4 lanes of PCI Express® with 8 Gbps of full-duplex data bandwidth default
• Default daughtercard with support for 2x Gigabit Ethernet, RS-232/RS-485 serial, USB 2.0 interfaces
• 14-bit quad ADC and DAC interfaces for low-speed analog signals, and 8x LVTTL general-purpose digital I/O lines
• Designed for use within the ultra-compact, rugged PowerBlock 50 chassis

• Embedded processor for system control and management
• Ultra-compact, rugged form factor for Ensemble™ 1000 systems
• Features embedded Intel® EP80579 SoC processor
• Integrated 512-MB DDR2-800 SDRAM with ECC protection
• High-bandwidth PCI Express® interface to system backplane for inter-processor communication
• Integrated Gigabit Ethernet, USB, RS-232/422/485, LVTTL, AD/DA I/O
• Integrated flash memory technology for power-on boot and application code

Mechanical (fully integrated module)
Size: 117 mm x 101 mm x 15 mm
Weight: 350 g

Software
Development tools
   Linux BSP for DMA and mailbox communication over PCI
      Express fabric and I/O lines
   Operating system support Linux

Processing Engine
X86 Architecture SoC
   Intel EP80579 at 1.20 GHz, IA-32 core
   689 SPECint 2000, 708 SPECfp 2000

Memory
SDRAM: 512-MB, 32-bit DDR2-800
SPI flash: 2-MB
NAND flash: 2-GB

Backplane Interconnect
Switch fabric
   4-lane PCI Express serial interconnect
   8 Gbps, full-duplex
System management
   I2C-based system management bus (SMBus)

Integrated I/O – Standard I/O Daughtercard
Ethernet I/O: 2x Gigabit Ethernet
Serial I/O
   1x RS-232 or 1x RS-485
   1x USB
General-purpose I/O: 8x LVTTL
Analog I/O
   14 bit quad ADC
   14 bit quad DAC

Custom Engineering
I/O daughtercard design kit and custom services available on request.

Environmental*
Temperature
   Operating: 0°C to 55°C per VITA-47 CC1
   Storage: -40°C to +85°C per VITA-47 CC1
Humidity: 15-90% RH, non-condensing
*The environmental parameters listed are for this module in the Ensemble 1000 Series system as currently qualified using the supported components as specified in the engineering development kit. Note that the operational ranges specified here are for temperatures at the edge of the module. Qualification in your application is dependent upon the chassis configuration, the heat exchange unit chosen, as well as the cooling fluid used. For further details consult factory.

Electrical
Input voltage
   12V DC: 2.5A
   3.3V DC: 1.3A
   1.5V DC: Not used
Power consumption
   Maximum: 50W
   Typical: 35W