FPGA Compute nodes
FPGA processor: Altera® Stratix GX 230/360HF (industrial, mid speed grade).
Number of FPGAs: 1
QDRII SRAM
Capacity per FPGA: 32 MB
Bandwidth per FPGA: 11.26 GB/s full-duplex (peak)
DDR3 SDRAM
Capacity: 1 GB
Bandwidth: 6.4 GB/s (peak)
Flash memory
Capacity: 64 MB (typically 3–4 bit stream images)
PCIe ports to host processor Gen 2 x4 or x8
Fiber links (with RTM assembly)
4 pair at 10 Gbps each, full-duplex .850 nm multi-mode fiber with a single QSFP+ module connector.
Total bandwidth: 40 Gbps on each direction.
LVDS port
8 pairs at 500 Mbps each to J16 XMC connector.
Total bandwidth: 500 MB/s RTM assembly
IOR-280 provides 8 QSFP+ 10 Gigabit Ethernet
ports with two IOM-200s configured.
Open Standards
IOM-200 Vita 42 XMC, Vita 42.3 PCIe
IOR-280 Vita 46.10 RTM
Supported Configurations
Ensemble SBC6521 Single Board Computer
Ensemble LDS6520 Low Density Server
Electrical/Mechanical Specifications
Power: 25 W (GX230HF), 28W (GX360HF) (high typical, depends largely on application IP)
Dimensions: VITA 42.0, single-width, shortened-depth XMC format
Environmental Specifications
Air-cooled Version
Minimum airflow** (per slot at sea level) TBD
Temperature**
Operating -0°C to +40°C
Storage -40°C to +85°C
Rate of Change: N/A
Humidity: 10-90% (non-condensing)
Vibration
Random 0.003G²/Hz, based on
20 to 2,000Hz, 1 hr/axis
Shock 20G Z-axis, 32G X&Y-axis,
11 msec, half-sine pulse,
3-Positive and 3-Negative
Altitude**
Operating 0 to 10,000 ft
Storage 0 to 30,000 ft
Salt/Fog Consult factory
Conduction-cooled version
Consult factory