• Dual-core Freescale MPC8641D processor running at up to 1.06 GHz
• Single-width AMC, either mid-hight or full-height
• 128 MB of NOR flash
• Two DDR2 memory buses
• Switch-fabric communications can use either RapidIO or PCI Express
• Four Gigabit Ethernet connections

• Dual-core processing power and flexible high-bandwidth I/O
• Freescale™ MPC8641D processor delivers up to 20 GFLOPS
• Fully compatible with both ATCA and μTCA Ensemble™ platforms
• Choice of serial RapidI® or PCI Express® switch fabrics
• I/O of 16 Gbps handles streaming datasets

Processor
Freescale MPC8641D processor
   Dual-core (e600) Power Architecture
   Up to 1.06 GHz

Memory
Flash   
   128-MB NOR
DDR2 SDRAM 
   2 banks
   Up to 1 GB each
Memory buses 
   2
   Each at up to 533 MHz
   64 bits wide

AMC Connector
Switch-fabric options
   1x/4x serial RapidIO: AMC fat pipe Ports 4-7
   x8, x4, x2, x1 PCI Express: AMC fat pipe Ports 8-11 and 4-7, not AMC.1 compliant.
Dual 1000BASE-BX Ethernet connections: AMC common option Ports 0-1
Serial ATA (SATA) connection: AMC common option Port 2

IPMB
Renesas HD64-F2166 micro-controller
FRU 4-KB serial EPROM
Two NE1618DS temperature sensors with diodes
   One external diode
   One internal diode to the 8641D
IPMB-L 2-wire interface to carrier
Voltage monitoring

Front-Panel I/O
Two RJ45 10/100/1000 Ethernet ports
MPC8641D UART via micro-DB9 and DB9 Y-cable
IPMI UART or second MPC8641D UART, jumper selectable

Mechanical
Full-height  
   Width: 73.81 mm
   Depth: 180.6 mm
   Height: 28.96 mm
Mid-height
   Width: 73.81 mm
   Depth: 180.6 mm
   Height: 18.96 mm
Supports AMC B+ bays

Test and Development
16-pin JTAG MPC8641D emulator connector
14-pin JTAG/programming header for IPMI controller
ICT test points
Full JTAG chain from AMC connector

Power Consumption
Consult factory.

Software Support
Linux® and VxWorks® support