Specifications
14- or 16-Slot ATCA Chassis
Dimensions
14-slot configuration: 12U x 444 mm x 385 mm (HxWxD) (approximate)
16-slot configuration: 13U x 497 mm x 394 mm (HxWxD) (approximate)
AC to 48V DC power supply converter (capacity to match the application needs)
Air-cooled, up to 250W per board and 25W per RTM
5-Slot ATCA Chassis
Dimensions
5U x 441.8 mm x 399.3 mm (HxWxD) (approximate)
5 ATCA slots
2 fabric slots
3 node slots
5 rear transition modules (RTM)
1200W Universal 85 to 264VAC power supply
Air-cooled to 200W per board and 15W per RTM
2-Slot ATCA Chassis
Dimensions
3U x 441.8 mm x 416.5 mm (HxWxD) (approximate)
Two ATCA slots
2 node slots
2 rear transition modules (RTM)
800W Universal 85 to 264VAC power supply
Air-cooled to 200W per board and 15W per RTM
External Communication Ports
One or more AMC-based Gigabit Ethernet interfaces
AMC-based fiber interface for Gigabit Ethernet and 4x serial RapidIO
Availability and Serviceability
IPMI management interfaces
Power Input
Dual 48VDC
Software
Management Plane
Shmm/IPMI
Data Plane
RapidIO or 10 Gigabit Ethernet
Up to 10 Gbps throughput
112 ns latency per switch (RapidIO)
Control Plane
1 Gigabit Ethernet
Managed Ethernet SW
1 Gbps throughput
Operating System
Linux® or VxWorks®
DSP BIOS
Communications Middleware
RapidIO system configuration
FPGA bitstreams
DSP application
RapidIO utilities
Device Driver
RapidIO
Environmental
Ruggedization level: Commercial
Temperature
Operating: 0°C to 40°C
Storage: -40°C to +85°C
Humidity: 10% to 90% noncondensing
Compliance
PICMG 3.0 Rev. 1.0
IEEE 1386.1-2001: PCI Local Bus Specification Rev. 2