- 6U OpenVPX compliant
- Two octal-core Sandy Bridge
server-class Intel® processors provide 16 cores at 1.8 GHz
- Total of 460 GFLOPS peak in
a single slot
- Serial RapidIO® and/or 10
Gigabit Ethernet fabric enabled
- Up to 32 GB of DDR3-1600
SDRAM with 102 GB/sec peak performance
- Integrated PCI Express®
infrastructure for co-processing and I/O expansion plane communications
- Multiple I/O options,
including Gigabit Ethernet, RS-232, RS-242, GPIO, and SATA
- Advanced system management
subsystem
- Mercury MultiCore Plus®
software infrastructure support
- Server class processing in a rugged embedded form
factor is suitable for the most
demanding deployed applications
- Large 32
GB of DRAM supports memory-intensive applications such as high-end radar and
persistent ISR
- QPI interconnect supports SMP operating
environment for easy programmability
- Flexible and versatile POET enables scalable,
high speed, and deterministic communications and IO
- 20 MB on-chip cache allows crucial
calculations to remain cache-resident, accelerating processing
- Optimal balance between I/O and processing to
prevent data starvation
Intel® 32-nm Sandy Bridge–Class Processor
Two Octal-core E5-2648L Sandy Bridge server-class processors at 1.8 GHz each
Peak performance 460 GFLOPS
Threads per core 2
QPI interface between processors
2 x 25.6 GB/s peak performance
Intel® Virtualization Technology
Dual Integrated x16 Gen2 PCI Express® interface
DDR3-1600 16 or 32 GB with ECC
Raw memory bandwidth 102 GB/sec
BIOS SPI flash Dual 8 MB partitions
NAND flash 8 GB, SATA interface
Virtex® 6 HX250T or HX380T Field-Programmable Gate Array (FPGA)
Provides fabric bridging to data plane
Can act as co-processor executing iFFT/FFT, image or signal processing
Configured from CPU or dedicated configuration ROM
Ethernet Connections
1000BASE-BX Ethernet to P4 connector 2
OpenVPX Control Plane
10/100/1000BASE-T Ethernet to P4 connector 1
Accessible via OpenVPX RTM or external chassis interface
10/100/1000BASE-T Ethernet connection 1
to front panel (air-cooled module), or to backplane (conduction-cooled module)
Ethernet functions supported by the chipset include:
UDP, TCP, SCTP, ARP, IPv4, IPv6, IEEE1588, flow control,
802.1P (priority), 802.1Q (VLAN)
IPMI (System Management)
On-board IPMI controller
Voltage and temperature monitor
Geographical address monitor
Power/reset control
FRU and on-board EEPROM interfaces
FPGA, CPU and CPLD interfaces
OpenVPX® Multi-Plane Architecture
System Management via IPMB-A and IPMB-B link on P0 management plane
Dual 4x Serial RapidIO® or 10 Gigabit Ethernet interfaces on P1 data plane
Dual full x16 or dual x8 PCIe® expansion plane
Dual 1000BASE-BX Ethernet control plane
Additional I/O Capabilities
RS-232 serial interface 1
to front panel (air-cooled), or to backplane (conduction-cooled)
Configurable for RS-422 signaling when routed to backplane
RS-422 serial interface to backplane 1
RS-232 serial interfaces to backplane 2
Front-panel USB 2.0 interface 1
(air-cooled configurations only)
USB 2.0 interfaces to backplane 2
Front-panel eSATA interface 1
(air-cooled configurations only)
SATA interfaces to backplane 2
Single-ended GPIO interfaces to backplane 8
System signals to backplane
NVMRO, ChassisTest, Environmental Bypass, MemoryClear
Mechanical
6U OpenVPX (air-cooled and conduction-cooled)
1.0” slot pitch
OpenVPX and VPX REDI
Environmental
Air-Cooled – Mercury Commercial
Temperature
Operating 0°C to +40°C*
Storage -40°C to +85°C
*Customer must maintain the required cfm level.
Humidity
Operating 10-90%, non-condensing
Vibration 0.003 g2/Hz, 20-2000Hz, 1 hr/axis
Shock 20G z-axis; 32G x, y axis; 11ms half-sine
Altitude
Operating 0-10,000 ft*
*Customer must maintain the required cfm level.
Air-Cooled – Mercury Rugged Level 1
Temperature
Operating -25°C to +55°C*
Storage -55°C to +85°C
*Customer must maintain the required cfm level.
Humidity
Operating 5-95%, non-condensing
Vibration 0.04 g2/Hz; 20-2000 Hz; 1 hr/axis
Shock 50g z-axis; 80g x-, y-axis; 11 ms half-sine
Altitude
Operating 0-30,000 ft*
*Customer must maintain the required cfm level.
Conduction-Cooled – Mercury Rugged Level 3
Temperature
Operating -40°C to +71°C at the card edge
Storage -55°C to +125°C
Humidity
Operating 0-100%
Vibration 0.1 g2/Hz, based on 5-2000 Hz, 1 hr/axis
Shock 50g z-axis; 80g x-, y-axis; 11 ms half-sine
Altitude 0-70,000 ft*
*Customer chassis must maintain card edge at 71°C.